Added File for Schallplaten Relay controler

Mini-OLED.yml

@@ -73,6 +73,8 @@ sensor:
     temperature:
       name: "Tim Schreibtisch Temperatur"
       id: "tim_schreib_temp"
+      filters:
+        offset: -3.5
     humidity:
       name: "Tim Schreibtisch Luftfeuchte"
       id: "tim_schreib_hum"

schall-relay.yml

@@ -0,0 +1,150 @@
+esphome:
+  name: d1-schallplatten-relay
+  friendly_name: D1 Schallplatten Relay
+
+esp8266:
+  board: esp12e
+
+# Enable logging
+logger:
+
+# Enable Home Assistant API
+api:
+  encryption:
+    key: "tY/skBnkQn1sZRBYYJ4LL571z+aA1P463WvaX58Zu2w="
+
+ota:
+  platform: esphome
+
+wifi:
+  ssid: !secret wifi_ssid
+  password: !secret wifi_password
+
+captive_portal:
+
+globals:
+  - id: mode
+    type: int
+    restore_value: no
+    initial_value: '0'
+
+
+binary_sensor:
+# Erster Knopf: Mode Select
+  - platform: gpio
+    pin:
+      number: 2
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "Mode-Select"
+    internal: true
+    on_press:
+      then:
+        - lambda: |-
+            id(mode) = (id(mode) + 1) % 3;
+            ESP_LOGD("Mode", "Neuer Modus: %d", id(mode));
+
+            auto call_off = id(rgb_led).turn_off();
+            auto call_on = id(rgb_led).turn_on();
+            if (id(mode) == 0) {
+              call_off.perform();
+              ESP_LOGD("LED", "LED wird ausgeschaltet");
+            } else if (id(mode) == 1) {
+              ESP_LOGD("LED", "LED auf Grün");
+              call_on.set_rgb(0.0, 1.0, 0.0);
+              call_on.perform();
+            } else if (id(mode) == 2) {
+              ESP_LOGD("LED", "LED auf Rot");
+              call_on.set_rgb(1.0, 0.0, 0.0);
+              call_on.perform();
+            }
+            
+            
+
+# Zweiter Knopf: Verhalten abhängig vom Modus
+  - platform: gpio
+    pin:
+      number: 5
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "Funktion-Vertärker"
+    internal: true
+    on_press:
+      then:
+        - lambda: |-
+            if (id(mode) == 0) {
+              ESP_LOGD("Action", "Modus 0: Keine Aktion");
+            } else if (id(mode) == 1) {
+              ESP_LOGD("Action", "Modus 1: Ausgang EIN");
+              id(relay_1).turn_on();
+            } else if (id(mode) == 2) {
+              ESP_LOGD("Action", "Modus 2: Ausgang AUS");
+              id(relay_1).turn_on();
+            }
+  - platform: gpio
+    pin:
+      number: 0
+      mode: INPUT_PULLUP
+      inverted: true
+    name: "Funktion-BT"
+    internal: true
+    on_press:
+      then:
+        - lambda: |-
+            if (id(mode) == 0) {
+              ESP_LOGD("Action", "Modus 0: Keine Aktion");
+            } else if (id(mode) == 1) {
+              ESP_LOGD("Action", "Modus 1: Ausgang EIN");
+              id(relay_2).turn_on();
+            } else if (id(mode) == 2) {
+              ESP_LOGD("Action", "Modus 2: Ausgang AUS");
+              id(relay_2).turn_off();
+            }
+
+
+
+button:
+  - platform:
+    name: Vertärker
+    on_press:
+      then:
+        - switch.turn_on: relay_1
+
+switch:
+  - platform: gpio
+    id: relay_1
+    inverted: true
+    internal: true
+    on_turn_on:
+    - delay: 500ms
+    - switch.turn_off: relay_1
+    pin: 13
+  
+  - platform: gpio
+    id: relay_2
+    name: "BT-Adapter"
+    inverted: true
+    pin: 15
+
+light:
+  - platform: rgb
+    name: "Status-LED"
+    id: rgb_led
+    red: red_out
+    green: green_out
+    blue: blue_out 
+
+
+output:
+  - platform: esp8266_pwm
+    id: red_out
+    pin: 4
+
+  - platform: esp8266_pwm
+    id: green_out
+    pin: 14
+
+  - platform: esp8266_pwm
+    id: blue_out
+    pin: 12
+