esphome:
  name: d1-schallplatten-relay
  friendly_name: D1 Schallplatten Relay

esp8266:
  board: esp12e

# Enable logging
logger:

# Enable Home Assistant API
api:
  encryption:
    key: "tY/skBnkQn1sZRBYYJ4LL571z+aA1P463WvaX58Zu2w="

ota:
  platform: esphome

wifi:
  ssid: !secret wifi_ssid
  password: !secret wifi_password

captive_portal:

globals:
  - id: mode
    type: int
    restore_value: no
    initial_value: '0'


binary_sensor:
# Erster Knopf: Mode Select
  - platform: gpio
    pin:
      number: 2
      mode: INPUT_PULLUP
      inverted: true
    name: "Mode-Select"
    internal: true
    on_press:
      then:
        - lambda: |-
            id(mode) = (id(mode) + 1) % 3;
            ESP_LOGD("Mode", "Neuer Modus: %d", id(mode));

            auto call_off = id(rgb_led).turn_off();
            auto call_on = id(rgb_led).turn_on();
            if (id(mode) == 0) {
              call_off.perform();
              ESP_LOGD("LED", "LED wird ausgeschaltet");
            } else if (id(mode) == 1) {
              ESP_LOGD("LED", "LED auf Grün");
              call_on.set_rgb(0.0, 1.0, 0.0);
              call_on.perform();
            } else if (id(mode) == 2) {
              ESP_LOGD("LED", "LED auf Rot");
              call_on.set_rgb(1.0, 0.0, 0.0);
              call_on.perform();
            }
            
            

# Zweiter Knopf: Verhalten abhängig vom Modus
  - platform: gpio
    pin:
      number: 5
      mode: INPUT_PULLUP
      inverted: true
    name: "Funktion-Vertärker"
    internal: true
    on_press:
      then:
        - lambda: |-
            if (id(mode) == 0) {
              ESP_LOGD("Action", "Modus 0: Keine Aktion");
            } else if (id(mode) == 1) {
              ESP_LOGD("Action", "Modus 1: Ausgang EIN");
              id(relay_1).turn_on();
            } else if (id(mode) == 2) {
              ESP_LOGD("Action", "Modus 2: Ausgang AUS");
              id(relay_1).turn_on();
            }
  - platform: gpio
    pin:
      number: 0
      mode: INPUT_PULLUP
      inverted: true
    name: "Funktion-BT"
    internal: true
    on_press:
      then:
        - lambda: |-
            if (id(mode) == 0) {
              ESP_LOGD("Action", "Modus 0: Keine Aktion");
            } else if (id(mode) == 1) {
              ESP_LOGD("Action", "Modus 1: Ausgang EIN");
              id(relay_2).turn_on();
            } else if (id(mode) == 2) {
              ESP_LOGD("Action", "Modus 2: Ausgang AUS");
              id(relay_2).turn_off();
            }



button:
  - platform:
    name: Vertärker
    on_press:
      then:
        - switch.turn_on: relay_1

switch:
  - platform: gpio
    id: relay_1
    inverted: true
    internal: true
    on_turn_on:
    - delay: 500ms
    - switch.turn_off: relay_1
    pin: 13
  
  - platform: gpio
    id: relay_2
    name: "BT-Adapter"
    inverted: true
    pin: 15

light:
  - platform: rgb
    name: "Status-LED"
    id: rgb_led
    red: red_out
    green: green_out
    blue: blue_out 


output:
  - platform: esp8266_pwm
    id: red_out
    pin: 4

  - platform: esp8266_pwm
    id: green_out
    pin: 14

  - platform: esp8266_pwm
    id: blue_out
    pin: 12